FS2000 Vickers Standard VC-10 British Airways (1975).
G-ARVM Now preserved at Cosford.

Model & Animation by David Maltby.
David@Maltbyd.fsnet.co.uk
All feedback is welcome.
Latest versions of models can be downloaded from
www.Maltbyd.fsnet.co.uk

Created with Abacus FS Design Studio & Aircraft Animator.
Tilting bogies done with 'SDLEdit'

To install, unzip & copy the extracted folder into your 'FS2000\Aircraft\' folder.

The original model was created with the default 4 engine Heavy aircraft
panel, as I am not interested in creating panels.
There are some good panels available on the internet. So go & pinch
one of them if you want to.

This aircraft is Freeware.
It may not be sold for profit.
You may repaint this model and upload it to any free internet site
as long as David Maltby is credited for the original aircraft model.

System Performance
------------------
This model is a bit more greedy with system resources than my BAC 1-11.
I tried my best to get frame rates up as high as I possibly could.
I have tried all sorts of changes & none of them made much difference.
Basically, it all seems to boil down to the number of textured parts & this aircraft just has a lot more parts than the 1-11.
My PIII 850 (Voodoo 3 2000 graphics) gives reasonable frame rates of around 20-25. I have also tried it on a Celeron 533 where the frame rates were not so good, about 15.
Sorry if you don't get the frame rates you need, I did try.

Auto Pilot
----------
I wrongly assumed that the autopilot knew how to fly a plane.
The autopilot will over bank & dive or even turn the wrong way if you enter a heading change of over 90 deg. Things seem fine on smaller heading changes. I don't know why this happens & have not been able to correct it. If you can help please let me know.